Specifications
|
Timebase
|
|
Rate (single shot)
|
200MSa/s to 100Sa/s
5nS/sample to 10mS/sample
50nS/division to 100mS/division
|
Rate (Repetitive)
|
2GSa/s and 1GSa/s
5nS/division to 100nS/division
|
Accuracy
|
+/- 0.01%
|
Resolution
|
5ns
|
Skew
|
< 5 ns
|
Inputs
|
|
Inputs
|
1 DSO + 8 Logic Analyzer
|
Outputs
|
|
Outputs
|
8 Pattern Generator + 1 Trigger out (TTL)
|
Oscilloscope (Analog)
|
|
Bandwidth
|
60MHz
|
Gain Range (per division)
full scale = 8 divisions
|
Probe
|
Voltage per division
|
Full scale voltage
|
1x
|
50mV to 500mV per division
|
400mV to 4V
|
10x
|
500mV to 5V per division
|
4V to 40V
|
|
Max Input Voltage
|
max input voltage at probe tip depends on probe type (1x and 10x)
Probe
|
Continuous
|
BNC
|
± 20V DC
|
1X probe (included):
|
± 20V DC
|
10X probe (included):
|
± 200V DC
|
|
Vertical Range
|
8 divisions
|
Offset Range
|
± 4 divisions
|
Offset Resolution
|
12.5mV
|
Coupling
|
AC and DC
|
Impedance
|
1MΩ // 15pF
|
DC Accuracy
|
± 2%
|
Memory channel
|
Yes.
|
Logic Analyzer (Digital)
|
|
Impedance
|
100K ohm || 2pF
|
Sensitivity
|
<500 mv
|
Max. input voltage
|
+5.5V DC
|
Bandwidth
|
100MHz
|
Threshold voltage
|
0.6V to 1.65V (1.2, 1.5, 1.8,2.5,3.0, 3.3, 5.0V Logic Families)
|
Memory channels
|
Yes.
|
SPI
|
|
Trigger
|
Yes, 32 bit wide trigger word, Mode 0..3 supported
|
Decoding window
|
Yes
|
I2C
|
|
Trigger
|
Yes,32 bit wide trigger word,
|
Decoding window
|
Yes
|
Pattern Generator (Digital output)
(Digital word generator)
|
|
Rate
|
100MSa/s...10KSa/s
|
Buffer Size
|
Max: 1023 points to 3 points
|
Arming control
|
Sync with MSO trigger, sync with MSO arm and manual start.
|
Loop control
|
Continuous and variable.
|
Code generation wizard
|
SPI, Counter, clock....
|
Output level |
Max 3.3V. 6 software selectable levels.
(1.2, 1.5, 1.8,2.5,3.0, 3.3, 5.0V Logic Families)
Current drive 14ma/pin |
Output control
|
Individual channel and sample by sample output enable.
|
Spectrum Analyzer (FFT)
|
|
Frequency range
|
0..100MHz
|
Resolution:
|
0.098Hz to 195KHz depending on frequency range setting.
|
Window
|
Rectangular, Tapered Rectangular, Triangular, Hamming, Hanning, Flat top
and Blackman-Harris.
|
Plot
|
Magnitude, Power Spectrum, Power Density, Real and Imaginary.
|
Zoom
|
Vertical and Horizontal.
|
Memory channel
|
Yes.
|
Averaging channel
|
Yes.
|
Cursors and Measurements
|
2
|
Memory
|
|
Buffer Size
|
1000 points/channel
|
Trigger
|
|
Type
|
Rising Edge (Adjustable level),
Falling Edge (Adjustable level),
Pulse Width
8 bit wide Logic Analyzer
I2C
SPI
|
Position (pre/mid/post) |
Fully adjustable to anywhere in the buffer. |
External trigger input
|
Any of the digital inputs can be used as an external trigger.
|
External trigger out
|
Yes.
|
Mode
|
Auto, Normal and Single.
|
Autosetup
|
Yes.
|
Range (vertical)
|
8 divisions.
|
Resolution
|
12.5mV
|
|
|
|
Software
|
|
Windows XP/Vista/win7/win8
|
Yes.
|
Spectrum Analysis / FFT
|
Yes.
|
Measurements
|
Yes.
|
Physical
|
|
Interface
|
USB
|
Probes
|
One 1x/10x switchable probe is included.
|
Connectors
|
BNC: 2 total: Input and trig-out
Logic Analyzer/Pattern Generator: 8
USB
|
Calibration point
|
Yes
|
Power Requirement
|
USB powered
|
Dimensions
|
4.0" x 2.4" x 0.8" (102mm x 61mm x 20mm)
2.5oz. (70g) (MSO only)
Shipping box: 9" x 6" x 2"
Shipping weight: 14oz.
|
Prices
|
|
 |
|
Price
|
Part Number
|
|
|
MSO-19
(includes: MSO, oscilloscope probe, wire harness, logic analyzer
clips, USB cable)
|
Optional accessories
|
|
|
|
|
|
tbd
|
|
|
|
DSO-probe-dif-kit2
(includes: probe, power supply, clips, carrying case)
|
100x Probes
(100MHz, 1.5 meter)
|
|
DSO-probe-x100
|
1x/10x Probes
(60MHz, 1.2 meter)
|
|
P-PROBE-P60
|
Wire harness
|
|
MSO-19-WIRES ( 2pc Wire harness for MSO-19)
MSO-19-WIRES-CLIPS (Wire harness and 9 clips for MSO-19)
|
11 Nano clips
|
|
LA-NANOCLIPS-11
11 Nanoclips (Red or black)
|
4 Nano clips
|
|
LA-NANOCLIPS-4
4 Nanoclips (Assorted colors)
|
TDR Adapter
|
$40
|
MSO-19-TDR-ADAP
BNC splitter and cable.
|
